Airsoft rifle Specna Arms SA-A03 ONE™ SAEC™ Kestrel™ ETU Half-Tan

Product description Specna Arms SA-A03 ONE™ SAEC™ Kestrel™ ETU airsoft rifleThe Kestrel V2 Basic ETU by Eshooter is an advanced ETU system featuring ease of use, durability and functionality. The Kestrel V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overload due to motor damage or battery drain.Functions of the Kestrel Basic system:-Pre-cocking programmable in 5 stages with a piston position learning function. (function requires a few single shots after connecting the battery for calibration)-Active Break. The replica performs a full cycle with each shot, so that no unnecessary overloads are created in the GB due to performing part of the cycle.-Locked Rotor Protection, function protects the inside of the replica in case of damage to the motor-Battery Drain Protection. Protection against battery discharge. The motor vibrates, the blue LED illuminates five times to indicate battery drain-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.The SA-A03 airsoft rifle by Specna Arms has been made predominantly from a uniform zinc-aluminium alloy, with the use of steel elements in the most critical points of the replica (so all screws, pins and the tactical sling mount are steel). The SF type stock, which houses the battery, as well as the pistol grip, are made of polymer polymer. The body of the replica and the RIS rail assembly have been subjected to the anodising process, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself was done by a powder coating process, after the surface had been sandblasted. This ensures a much higher than usual abrasion resistance of the applied paint. The Half-Tan version has a pistol grip, buttstock and magazine made in tan. In addition, the set includes 2 covers for the RIS rails, made of soft polymer also in tan colour. They can easily be cut to fit rails of different lengths.The stock has been very well fitted - in a way that has so far only been seen almost exclusively from G&P or Classic Army manufacturers - and perfectly balanced. This ensures ideal manoeuvrability of the replica, while its weight is also almost imperceptible after placing the replica against the shoulder. The replica uses a new generation quick spring exchange system, the so-called SAEC™. This allows quick and efficient adjustment of the replica's power to the conditions expected on the playing field without the need to have access to a workshop or a number of specialized tools. The process of replacing the spring is now even faster than with the previous version of the system.Thanks to the SAEC™ System there is no need to pull the gearbox out of the replica - you just need to remove the stock guide (without the use of tools - it is attached by means of a screw-on ring and a snap), and then unscrew a special pin located underneath it together with the spring guide bearing. The mainspring is replaced, the bolt is screwed back into the barrel, the butt is attached and ... back in action! The whole operation takes literally a moment, and to reiterate: no tools required.The advantages of the SAEC™ System are difficult to overestimate. In light of the prevailing trend throughout Europe towards legal limits on replica discharge velocity and the arrangements that exist within the communities themselves, this system guarantees the user considerable options and a great deal of freedom. The SAEC™ System allows minimal time to replace the mainspring and thus adjust the replica's exit velocity to the area of play so as to guarantee the ideal compromise between the effectiveness of the firearm and the safety of yourself and other players.The replica has been fully adapted to work with batteries of the type LiPo and LiFe. With a base initial discharge velocity of the order ~430 FPS guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows the initial velocity to be reduced to ~310 FPS making the replica perfectly suited for short-range or indoor operations.The gearbox, reinforced at cylinder head height, conceals a steel spring guide that is part of the SAEC™ System and mounted on 8mm ball bearings and washers steel gears. The system is secured with four anti-reverse pawls. The lightweight, polycarbonate polymer piston is fitted with a set of steel teeth to increase its strength. This also features cylinder type 2 and steel cut-off lever. The replica is factory-installed with an accurate, rotating polymer Hop-Up chamber which allows very precise and stable adjustment of the BB overclocking system. Upgraded version has a number of new reinforced parts such as:- a set of reinforced steel gears- a bearing-mounted, steel spring guide- a lightweight, polymer piston with steel slat- an aluminium, sealed piston head- a metal cylinder head- a sealed, metal nozzleThe Upgraded has been fitted with a 22mm dorsal RIS rail, a set of front RIS rails and an adjustable buttstock. Metal flip-up sights have been fitted on the upper RIS rail, but these can be freely replaced by any optoelectronic sighting device. Thanks to the sliding buttstock finished with an anti-slip textured footplate, it is possible to adjust the length of the replica to the shooter's build and preferences. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.To increase the realism of the gameplay, the replica is also equipped with a functional breech release.The replica also comes with a steel hi-cap magazine that holds 300 rounds. The Specna Arms replicas are compatible with many magazines available on the market, including.including manufacturers such as: - BOYI, - Airsoft Systems, - SRC, - King Arms, - MAG, - STAR, - ACM.The SAEC™ system is covered by European Patent number: 002639500Additional accessories shown in the preview images are not included! .Package include:MagazineReplicaIron sightsM90 additional springPackage exclude:The set does not include the battery nor charger